FACT: Fortune Magazine states that gaining skills is a proven way to recession- proof your job!
"Who else wants to recession-proof their income with tried and true methods, proven to make you more money and be more employable"
That's right, this tough economic time is hurting people. However, this is not the first economic hiccup and it will not be the last. Many people will no doubt lose their jobs or lose income. Do not let it happen to you!
Watch this "Emergency" video
Dear fellow budding AutoCADder,
In a crisis such as now, more and more people are suffering pay cuts and losing their jobs.
It's not their fault.
Companies are getting hammered right now and to survive they need to save money. Axing workers that don't directly add value to the business is the easiest way to do that.
Now, this seems very doom and gloom, but it isn't. During times of economic downturn there are immense opportunities for advancement for those willing to reach out and take it.
These opportunities are there for you if you make sure you are in the best position to take advantage of these opportunities.
One way to ensure both your job security and your income is by increasing your skills!
Even Fortune Magazine listed getting your skills up to date as one of their "8 ways to recession-proof your job". I am not making this stuff up. It is proven.
But what does this have to do with AutoCAD. Well, AutoCAD is one of the most valuable skills I know of. Due to it's complex nature, good AutoCAD drafters are few and far between. It is, for this reason, an extremely valuable skill to have, many making high five and into six figure incomes.
Now, I know, AutoCAD can be hard at first. But with a step-by-step video course where I show you every detail it is near impossible to go wrong. I wish there was a course like this around when I was learning AutoCAD.
I struggled for months learning AutoCAD
I know what it is like to struggle with AutoCAD. I was required to learn AutoCAD for my engineering studies and despite being what I like to call pretty tech savvy it stumped me. There were just so many commands and options that I didn't even know where to start.
I am sure right now you are feeling much the same. I have been there. I have sat at my office chair for hours on end literally pulling my hair out in distress. Finally, I couldn't take it anymore.
I thought, hey, I will just go buy a book and I will be fine. I wasn't. Book after book I had the same result. The books couldn't show me what needed to be done. They couldn't talk me through it and they definitely couldn't respond to my cries of help. I felt lost.
Was this a pointless cause? Was I never going to master AutoCAD?
I thought I had tried everything
I really thought, like you might think, that I had exhausted all my options. I thought of going to night school but it not only costs hundreds or even thousands of dollars but you have to sit in a room with 20 other strangers for hours on end. No thanks.
I looked online for courses, but there was nothing. Well, don't get me wrong, there were courses but they were often in the high hundreds of dollars. I didn't have that kind of money and they also didn't offer any physical product to overcome my slow internet. I was getting desperate.
After much soul searching I realised I had to be shown to understand the complex nature of AutoCAD. I picked up my shattered ego and asked some fellow students if they could help me.
Success!
I needed to be shown how to use this incredibly powerful but equally confusing program. Once I had been shown the basics and got around the interface I started to pick it up but it still took me months before I was any good.
Don't waste time and money on books and courses that don't work
My advice to you is, don't waste your time and money making the same mistakes I did. If I could find a course that laid it out in a simple fashion and actually showed me step by step what to do I would have saved myself immeasurable pain and struggle.
The problem I had was that there wasn't an online course that was easy to understand and both online and offline with someone to ask for help if I needed it. And as for courses in the high hundreds, some of us just don't have that kind of money.
You don't have to have this problem. I have created a course with all these things and for the moment it is ridiculously low priced.
I decided to create a course that works
After I realised that there were no decent courses that offered all the elements that are needed I decided to create my own. The website I created delivered free tutorials by email to anyone that would have them.
Soon, I started getting so many requests for a structured course that I couldn't say no. This is how AutoCAD Elite was born.
AutoCAD Elite is Born
AutoCAD Elite is a step-by-step program that goes from the beginning to advanced stages of AutoCAD and everywhere in between. It is both online and offline which means you can consume it whichever way you please.
The course comes in a 4 DVD set broken into Beginner, Intermediate, Advanced and 3D sections. Order AutoCAD Elite Now.
I believe AutoCAD Elite is the most easy to follow and comprehensive course available online.
Don't believe me, here is Proof!
I wouldn't buy from someone if I didn't see some proof first (even if their course was ridiculously awesome) but that's exactly what other courses expect you to do. Not me, I walk the walk.
So, here are some video tutorials as proof of how much you can learn from this course. There is enough value in these two videos let alone the other 4 hours.
Basic Lesson - Adding Text to your Drawings
This video is 10 minutes and 32 seconds
More Advanced Lesson - Viewports and Plotting
This video is 11 minutes and 02 seconds
Wait till you see the other 4 hours! Convinced that this course is right for you? Then add it to your cart.
What is in the Course?
Ok, so apart from the above videos what else is covered in AutoCAD Elite. Well, I have included a run down of what the course includes below.
Module 1
Touring the AutoCAD interface and some things that might be different in AutoCAD.
Using the AutoCAD interface
Using commands and repeating commands
Using the help files contained within AutoCAD
Finding online resources
The second module is all about files in AutoCAD. This includes:
Opening and saving files in AutoCAD
What are all these file extensions
Using the multiple drawing environment (very nifty)
Backup those precious drawings
Some file finding secrets that can save hours
In the third module we go over some common drawing commands and how to use them. These include:
Using the line command
Using the circle and arc commands
Using the align command (very useful)
A few other tips to save you time…
Module 2
This week we go over some more common drawing and modify commands and how to use them. These include:
Using the offset command
Using the trim command
Using rotate, move and copy commands
Object grouping… like blocks but for single drawing
Scale command… can be used to convert from say metric to english
Fillet and Chamfer commands
Break, join and break at point commands
A few other commands to make you the master
Module 3
In this module we go over drawing with layers. Layers are vital when getting into more advanced drawings. They allow you to remove certain elements from the drawing i.e. different materials or levels to allow different objects to be worked on. These include:
Setting linetypes and lineweights
Using layers and selecting and viewing different layers
Using each of the options for layer states
Saving layers for later use
A few other tips on layers
After the layer lessons we take a step back and talk about units in AutoCAD. This includes:
The different available units
The advantage of working in standard units
How to default to certain units
How to scale to change units
This training is vital to any serious AutoCADder.
Module 4
In this module we go over coordinate systems and how to use them and also everything you ever wanted to know about blocks. This includes:
Using relative coordinates for more accuracy
Using polar coordinates for ease of angles
A few other tips on using coordinates within AutoCAD
After this lesson I get into everything you will ever need to know about blocks. Including:
Creating a block
Inserting blocks
Editing blocks
Using layers within a block for more dynamic content
Using the block editor (very cool - introduced AutoCAD 2006)
Renaming, changing and adding attributes to your blocks
Blocks are huge time savers. So stop wasting time. These lessons will sky-rocket your productivity. I know, bit of a cliche but it is true.
Module 5
In this module we go over using External References (XREFS), customizing and using linetypes and how and why to use text in your drawings. This includes:
What is an XREF and why use one
How to insert an XREF
How to reload an XREF after altering the referenced file
In the second module we go over customizing and using linetypes. This includes:
Why you might need a custom linetype
How to create a linetype in a text file
How to create a linetype from drawing geometry
Using your custom linetypes
Then finally we go over how and why to use text in your drawings. This includes:
Adding single line text to your drawing
Want to write a novel? Multiline text is for you
Scaling your text.
XREF’s are especially cool.
Module 6
In this module we go over using dimensions, customizing and hatching your drawings and how to add a title block to make your drawings more professional. This includes:
What is a dimension
The types of dimensions
How to apply and edit dimension properties
How to implement dimensions
In the second module we go over how to hatch your drawings to distinguish different materials and areas. This includes:
How to apply hatching to an enclosed area
How to make use of the island command to hatch more efficiently
Using solid and gradient fills
A great resource for some custom hatch patterns
Then finally we go over how to add a title block to your drawings to add professionalism. This includes:
Creating the initial title block
Adding attributes to allow dynamic content addition
Adding your title block to your drawings
Module 7
In the first module we go over using layouts and viewports. This stuff is essential and the stumbling block for many AutoCADders. We cover:
What is a viewport
How to edit layouts
Scaling drawings for plotting
Zooming on specific sections for detail
In the second module we go over how to plot (print) your drawings. This includes:
Using your layouts in plot preview
Specific settings for plotting
Adding your title bar before plotting
Module 8
In this BONUS module we go over using everything 3d. This stuff is COOL. It includes:
Using 2d to make 3d
Shading for effect
Orbiting your drawing
Putting faces on your 3d objects
Now that's comprehensive! Don't miss this special offer, order securely now.
Would you spend $97 to secure your future?
Seriously, would you spend just $97 to secure your own and your families future. This price is crazy and to prove it I have made a table for you with monthly expenses a common household might incur.
Would you miss out on the chance to enhance your knowledge, income and your life just to support these habbits.
Go on, if you cut back on just one or two of these things it would be enough to pay for this course. Do yourself a favor and save hours of struggle.
Frequently Asked Questions
What does the course include? This course includes almost 5 hours of video tutorials on how to use AutoCAD properly. We cover:
Using the AutoCAD interface
Basic 2D Commands
How to get help within AutoCAD
Opening and saving files in AutoCAD
Using the multiple drawing environment (very nifty)
Object grouping… like blocks but for single drawing
Setting linetypes and lineweights
Using layers and selecting and viewing different layers
Working in units and scaling
Using relative coordinates for more accuracy
Creating, inserting and editing blocks
Using layers within a block for more dynamic content
Renaming, changing and adding attributes to your blocks
Everything about XREF's (External References)
Everything about linetypes including creating your own
Adding and editing text in your drawing
Use dimensions the proper way (and to standards)
Applying hatching and solid fills to your drawings
Increasing your drawings professionalism with title blocks
Viewports and Layouts
Plotting and Printing your drawings
Then we have some 3D modules:
Using 2d to make 3d
Shading for effect
Orbiting your drawing
Putting faces on your 3d objects
Drawing in 3D mode
This is just a run down. There is much, much more.
What if I am not great at computers?
Don't worry. The first few modules are aimed at fundamentals and principles that will build up to the intermediate and advanced techniques. Even a complete novice can use this course. If you can open a program and surf the net then your plenty qualified. Every module uses a "down-to-earth" step-by-step approach and is accompanied by exercises which will help you to remember various principles and techniques of the modules.
What if I can't afford it?
For a limited time I am offering AutoCAD Elite for 30% off, just $97. Would you spend $97 to not only save you hours and hours of time in learning but to help secure your income for you and your family?
How long will it take to complete?
The main course is 7 weeks in length. However, as mentioned there will be bonus 3D modules that may carry over this but these are 100% optional.
I am too busy to be bothered with the course!
Well, if you are too busy to use the course just think of the hours you will spend going it alone. In my opinion you are too busy to not use this course.
I want to learn how to master AutoCAD is this course for me?
Yes. In this course you can take the lessons in your PJ's, at the office or at the library. It is perfect for learning everything about AutoCAD when and where you want to.
Who are you to teach me AutoCAD?
I struggled for months with AutoCAD. I bought several different books and many different courses. After this process and many hours of struggle I finally learnt the ins and outs of AutoCAD. I use AutoCAD daily within my field and now I want to save you the trouble and teach you with easy-to-follow video tutorials on how to use AutoCAD.
What if I have a slow internet connection?
Don't worry. Every video has a downloadable version and you also get a set of 4 dvd's delivered to your door. So really you don't even need an internet connection.
Are my credit card details secure?
Absolutely, every payment is handled by PayPal. PayPal is a safe and secure third party payment processor so your details are 100% safe.
Is this course refundable?
Yes, this course comes with a 365 day money back guarantee. If for any reason during this 365 days you want to cancel then just send us an email and you will be refunded every cent. Also, as my gift to you for trying the course you can keep the 4 DVD's.
Can I order online?
You sure can. You can either scroll to the bottom of this page or order here.
What can this course do for you?
AutoCAD Elite is an aid for people that want to make a change in their life for the better. No program can help you if you don't take the opportunity and use it, but if you are an action taker then act now and AutoCAD Elite can help you:
Increase your job security
Get a pay rise from the boss
Make you more employable
Help you draft that design or invention you have been wanting to make
Give you that sense of accomplishment from seeing your design in action
Get you paid as a professional drafter
Give you the satisfaction of developing a new skill
Start taking action right now and head over to the signup page.
I am so confident of you accomplishing all these things and more that I have a crazy guarantee for you.
I guarantee you will love it, or your money back!
I am so confident you will love my AutoCAD Elite course that I am offering a 365 day money-back guarantee.
If for any reason, or no reason at all, you are not 100% satisfied with the course I will refund every cent of your purchase price. Not only that, but you can keep the 4 DVD's as my gift to you for trying my course. So there is absolutely no risk to you. Period!
So what is this going to cost?
As you have seen AutoCAD Elite is packed full of value. It takes the pain and suffering from trying to learn AutoCAD and takes you by the hand to actually show you what to do and how to do it.
Save hours of pain and struggle by showing you exactly what to do
Learn day or night at home or anywhere with DVD and online delivery
Take your time or go as fast as you want
Personal help from me whenever you need it
Costs a fraction of other courses (only $1.73 a day for the two month course about the cost of a soda)
Laid back and easy to understand approach (Hey, I am Australian)
All these things add up to, I believe, the best AutoCAD tutorial course around. And at just $97 with a 365 day guarantee, you can't afford to pass this up. So stop reading and click the big orange button below and make your life that much simpler.
Get My AutoCAD Elite Program Now for 30% off, Just $97 (plus shipping and handling)
P.S. Don't pay for expensive programs that make you sit in a room with strangers for hours on end. Take advantage of this course and learn AutoCAD on your own time. Heck you can even wear your PJ's ;-)
P.P.S. This offer is 30% off. I can't keep this up so the price goes back up in 5 days. So don't miss out and I will see you on the inside.
P.P.P.S. Seriously, there is nothing you can lose. Hit the big orange button and take action today!
If you have any questions about my AutoCAD Elite course or if you have any objections at all please send me an
email.
